The home of GB7CD & GB7RB  
  
 
 
 
 

 
 
ACCESSING THE NETWORK

You need a D-star compatable radio, set to the following :

 To Access GB7CD

  • Use 439.700 Mhz
  • DUP set to Minus (Nine Meg split) TX 430.700Mhz
  • Your Radio Must be in DV mode

Make sure callsign menus are programmed as below for basic operation feature.

  • UR is set to CQCQCQ
  • RPT1 is programmed with GB7CD--B
  • RPT2 is programmed with  GB7CD--G
  • My Callsign has your own callsign assigned

To Access GB7RB

  • Use 145.675 Mhz
  • DUP set to Minus (0.6mhz split) TX 145.075 Mhz
  • Your Radio Must be in DV mode

Make sure callsign menus are programmed as below for basic operation feature.

  • UR is set to CQCQCQ
  • RPT1 is programmed with GB7RB--C
  • RPT2 is programmed with GB7RB--G
  • My Callsign has your own callsign assigned

D-Star does not use CTCSS but relies on the programming above to be correct for your call to pass through the system, for full use of the System your callsign needs to be registered and propogated through the worldwide network of repeaters and reflectors.

Importantly ensure you have contacted us for Registration to D-Star, (See our Registration page). assuming you are not already registered.

 

 
 
 
 
   

SITE OWNED AND OPERATED

BY SOUTH GLAMORGAN RAYNET