Access

ACCESSING THE NETWORK
You need a D-star compatable radio, set to the following : 

To Access GB7CD Use 439.700 MhzDUP set to Minus (Nine Meg split) TX 430.700Mhz.

Your Radio Must be in DV mode.

Make sure callsign menus are programmed as below for basic operation feature.

UR is set to CQCQCQ

RPT1 is programmed with GB7CD–B

RPT2 is programmed with  GB7CD–G

My Callsign has your own callsign assigned

To Access GB7RB Use 145.675 MhzDUP set to Minus (0.6mhz split) TX 145.075 Mhz

Your Radio Must be in DV mode.

Make sure callsign menus are programmed as below for basic operation feature.

UR is set to CQCQCQ

RPT1 is programmed with GB7RB–C

RPT2 is programmed with GB7RB–G
My Callsign has your own callsign assigned

D-Star does not use CTCSS but relies on the programming above to be correct for your call to pass through the system, for full use of the System your callsign needs to be registered and propogated through the worldwide network of repeaters and reflectors.

Importantly ensure you are Registered for D-Star operation, ICOM-UK are facilitating this so e-mail them directly.

GB7CD and GB7RB now reside on DCS060D or XLX060D